Cylinder volume:16.63-81.38m³
Capacity:10-70t/h
Materials:Slag, calcium carbide residue, limestone, clay, river sand, quartz sand, water slag, etc.
+8619303970888
The cement dryer is composed of an inner cylinder, a middle cylinder, and an outer cylinder, forming a self-insulated circulating structure, so this new of dryer is also called a three-cylinder dryer. The combined three-cylinder dryer has the characteristics of compact structure, small footprint, low energy consumption, high thermal efficiency, drying effect of materials, and easy to achieve automatic control. It is mainly used to dry granular materials within a certain humidity range, such as yellow sand used in the dry powder industry, various specifications of molding sand used in the casting industry, and high furnace slag used in the building materials and cement industry. According to the different requirements of the industry the moisture content of the dried materials, the moisture content of the dried materials can be below 1-0.5%. It is an ideal product for various drying projects
The equipment is compact in structure and occupies a small area, which is half of the area of the same yield dryer, the civil construction investment is reduced by about60%, and the installation is convenient.
The whole machine is made of wear-resistant steel plates, which are 3-4 times more wear-resistant than ordinary steel plates, with low maintenance rate and service life.
The discharge temperature is basically lower than 60 degrees, it can be directly put into the warehouse without entering the cooling shed for cooling, which saves the production process production cost.
Adopting new energy-saving technology--embedded structure, as well as a special thermal engineering design concept, eliminating wind tunnel heat loss, increasing heat exchange area unit volume evaporation intensity, energy-saving effect is excellent, it is an environmentally friendly and energy-saving product to replace traditional drying equipment.
Model | Φ2.0×4m | Φ2.5×5m | Φ2.5×7m | Φ2.7×7m | Φ3.0×7.0m | Φ3.2×7.0m | Φ3.6×8m |
Diameter(m) | 2 | 2.5 | 2.7 | 3 | 3.2 | 3.6 | |
length(m) | 4 | 5 | 7 | 8 | |||
Volume(m³) | 16.63 | 52.678 | 52.678 | 81.38 | |||
Capacity((T/h)) | Yellow sand15-20 | Yellow sand20-25 | Yellow sand25-30 | Yellow sand30-35 | Yellow sand35-40 | Yellow sand45-50 | Yellow sand65-70 |
Slag10-15 | Slag15-20 | Slag20-25 | Slag25-30 | Slag30-35 | Slag35-40 | Slag60-65 | |
Motor | Y2-132m-4E | Y2-132m-4E | Y2-132m-4E | Y2-132m-4E | Y2-160m-4 | Y2-160m-4 | Y2-160m-4 |
Power(kw) | 4×2 | 5.5×2 | 7.5×2 | 11×2 | 7.5×4 | 7.5×4 | 15×4 |
Reducer type | XWD7-23-11 | XWD6-23-7.5KW | XWD8-23-15KW | ||||
Reducer transmission ratio | 29 | ||||||
Speed(rpm) | 4-10 | ||||||
Maximum moisture(%) | 10-12 | ||||||
Finished moisture(%) | 1 | ||||||
Maximum moisture of sand(%) | 8-10 | ||||||
Final moisture of sand(%) | 0.5-1 | ||||||
Highest temperature(℃) | 700-750℃ |
"Pebble crushing is a common raw material in the sand and stone processing industry. Compared with the fixed crushing production line,
Reply"Sand production line is the production of all kinds of stone, sand, aggregate production lines, from a number of equipment, commonly used sand production
Reply"Any object to long-term stable use is inseparable from maintenance, in the operation of the time also need to pay more attention, mobile crusher is no exception.
Reply"With the continuous progress of science and technology, China's industrial system has undergone a huge leap in development
Reply
Leave a Comment