Feed size:≤100mm
Produce:80-800t/h
Materials:River pebble, granite, basalt, iron ore, limestone, quartzite, diabase, iron ore, gold ore, copper ore, etc.
+8619303970888
Vibrating feeder is also called vibrating feeder, also called vibrating feeder. The ZSW series vibrating feeder produced by our company is a new type of vibrating feeder designed for uniformly transporting large pieces of material in front of the crushing and screening medium and coarse crusher. The vibrating feeder adopts the structural characteristics of a double eccentric shaft vibration exciter to ensure that the equipment can withstand the impact of falling large pieces of material and has a large feeding capacity. In the production process, block and granular materials can be uniformly, regularly and continuously fed from the storage bin to the receiving device, thereby preventing the receiving device from crashing due to uneven feeding and extending the equipment Service life. Vibrating feeders can be divided into steel plate structure and grate structure. The steel plate structure feeder is mostly used in the sand and gravel production line to evenly feed the material into the crushing equipment; the grate structure feeder can coarsely screen the material. Make the system more economical and reasonable in configuration. Therefore, the vibrating feeder is widely used in the crushing and screening combined equipment of metallurgy, coal mine, mineral processing, building materials, chemical industry, abrasives and other industries.
GZD series vibrating feeder has simple structure, uniform feeding, good continuous performance, adjustable excitation force; timely change and control of flow rate, convenient operation
The eccentric block of the feeder is an excitation source, with low noise, low power consumption, good adjustment performance, and no punching phenomenon
If a closed body is used, it can prevent dust pollution, stable vibration, reliable work, and long life.
Vibrating feeder can adjust the exciting force, can change and control the flow at any time, the adjustment is convenient and stable
The amount of ore can be adjusted evenly, and it is generally used for loose materials. According to the performance requirements of the equipment, the pressure of the material on the tank should be minimized during the configuration design. The effective discharge of the warehouse material should not be greater than one-fourth of the tank width, and the flow rate of the material should be controlled at 6-18m/min. For materials with a large amount of feed, a block board of sufficient height should be set at the bottom of the silo; in order not to affect the performance of the feeder, the block board must not be fixed on the tank. In order to make the silo discharge smoothly, the inclination angle of the rear wall of the silo should be designed to be 55-65 degrees.
Model | Trough(mm) | Feed(mm) | Motor(kw) | Produce(t/h) | Shape(mm) |
GZD-650X2300 | 650X2300 | ≤300 | 1.1X2 | 80 | 2300X1360X780 |
ZSW-850X3000 | 850X3000 | ≤400 | 7.5 | 80-120 | 3110X1800X1600 |
ZSW-960X3800 | 960X3800 | ≤500 | 11 | 120-210 | 3850X1950X1630 |
ZSW-1100X4200 | 1100X4200 | ≤580 | 15 | 200-430 | 4400X2050X1660 |
ZSW-1100X4900 | 1100X4900 | ≤580 | 15 | 280-500 | 5200X2050X1700 |
ZSW-1300X4900 | 1300X4900 | ≤650 | 22 | 450-600 | 5200X2350X1750 |
ZSW-1300x6000 | 1300x6000 | ≤700 | 30 | 450-680 | 6100X2350X1750 |
ZSW-1500X6000 | 1500X6000 | ≤1000 | 37 | 400-800 | 6100X2550X1860 |
"Pebble crushing is a common raw material in the sand and stone processing industry. Compared with the fixed crushing production line,
Reply"Sand production line is the production of all kinds of stone, sand, aggregate production lines, from a number of equipment, commonly used sand production
Reply"Any object to long-term stable use is inseparable from maintenance, in the operation of the time also need to pay more attention, mobile crusher is no exception.
Reply"With the continuous progress of science and technology, China's industrial system has undergone a huge leap in development
Reply
Leave a Comment